How To Install Oracle Dataaccess Dll In Gac

My reckoner when information technology is turned on will not past the blue screen of Windows Vista, not able to run into the start with all the icons page

Had to restart the figurer and turned on will non get beyond Windows Vista of the screen blue, not able to run across the start with all the icons page

Restore signal:

Try typing F8 at startup and in the list of Boot selections, select Mode safety using Pointer acme to get there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Get-go > programs > Accessories > system tools > arrangement restore > choose another fourth dimension > side by side > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If restore piece of work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time information technology starts.

Go to your Bios/Setup, or the Boot Carte at startup and change the Kicking order to brand the DVD/CD drive 1st in the kicking order, and then reboot with the disk in the drive.

At the startup/ability on you lot should run across at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://world wide web.bleepingcomputer.com/tutorials/tutorial148.html

Link higher up shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot exist used to install or reinstall Windows Vista, and is merely a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); merely it is pretty darn decent of Microsoft to present Windows users who might non be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.cyberspace/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/become/active-isoburner.html

It's a very good Vista startup repair disk.

You can exercise a organization restart tool, organisation, etc it restore.

Information technology is NOT a disc of resettlement.

And the 32-bit is what normally comes on a estimator, unless 64-bit.

See yous presently.

Mick Murphy - Microsoft partner

Not able to see the profile pic of the people

Non able to run into the profile moving-picture show of the people while seeking their

How long it volition take.

Not able to run across the semi colon and comma when sending email

Hello

I am not able to see the semi colon and comma everything past typing the e-mail address to "TO" Nonetheless in the body of the email, I'1000 able to run across.

Cheers

Rakesh K *.

***********

The comma and semicolon are on the digital keyboard.

Click on the '123' button at the bottom left, and then you volition run into them.

UPDATE: the above is true then in the text box.  Sorry I misread your question and thought that was what you lot were asking most.  The semi-colon and comma are without role in the recipient area.

With the assistance of 5s with ios 9.2.1. Telephone call ringtone but screen does not show the answer since mode. Could non receive call and not able to see the contact call. This may be due to whatsapp.

With the assist of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and non able to meet the contact call. This may be due to whatsapp bug. Please specify.

bjmrao wrote:

With the help of 5s with ios 9.2.1. Call ringtone just screen does not bear witness the answer since mode. Could not receive call and not able to meet the contact call. This may be due to whatsapp problems. Delight specify.

Please ask Whatapps since you lot apply their app.

When asked "do y'all desire to enable Network Service listing? I go on to by clicking on the button "Activate this", and yet I am not able to meet the activities or connections to all networks.

When asked "practise you lot desire to enable Network Service listing? I continue to by clicking on the button "Activate this", and nonetheless I am non able to run into the activities or connections to all networks. My internet works fine, I just can't encounter if I am connected or non. Help?

original title: list of Network Service does not illuminate

Hi SikDude,

Please use the Forum of the community for Vista.

Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, ready it to automatic.

Please let us know if we can do something else.

Matt
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what yous think.

Non able to see the fields within a custom resource optimization

Hi all

I am not able to come across the fields within a custom value.

Hither is my code for the custom resource optimization:

public class CustomContentContainer extends VerticalFieldManager{      String content_header;     int container_height;     int displayWidth = Display.getWidth();     int displayHeight = Display.getHeight();      public CustomContentContainer(Cord content_header,int height){         super(Managing director.NO_VERTICAL_SCROLL | Director.NO_HORIZONTAL_SCROLL);         this.content_header = content_header;         container_height = displayHeight-acme;     }      protected void sublayout(int maxWidth, int maxHeight) {         super.sublayout(maxWidth, container_height);         setExtent(maxWidth,container_height);     };      protected void pigment(Graphics graphics)     {         int X_POS = xx;         int Y_POS = 20;          int width = displayWidth;         int top=container_height;         int[] xPts = {0, width, width, 0};         int[] yPts = {0, 0, tiptop, top};         int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };         graphics.drawShadedFilledPath(xPts, yPts, null, colors, nada);          graphics.setColor(0xc0c0c0);         graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);          int stringWidth = getFont().getAdvance(content_header);         graphics.setColor(0xF8F8F8);          graphics.fillRect(35, five, stringWidth+10, 30);          graphics.setColor(0xFF0000);         graphics.drawText(content_header, 40, 5);     };  }          

Here is the Code inside the class from the main screen

settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());         contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);          passwd1 = new CustomEditField();         passwd2 = new CustomEditField();         contentContainer.add(passwd1);         contentContainer.add(passwd2);         contentContainer.setMargin(35,35,35,35);          mainContainer.add together(vodavaultLogoField);         settingsContainer.add(contentContainer);         mainContainer.add(settingsContainer);         add together(mainContainer);          

Yous must call the super.paint (.) in your pigment (...) optimization of resources, if yous paint all areas which are added.

Not able to meet the software Audio Beat and silent witness not lit on cool windows 8

Hello

I use a laptop: HP Envy iv 1046tx. I installed fresh windows eight on information technology. Later on that I downloaded the audio software of HP software: the site, but this driver is not accepting.

1. I am not able to see the Beat Sound software and Blaster setting in Control Panel.

2. when I am pressing mute mute button (carmine lite) was not on the push

Thank you lot

Prabhat

Try the commuter IDT Audio hither:

http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58635.exe

I'm not able to see the file in the facebook using Windows Telephone group.

I'm non able to see the file in facebook groups. Using Facebook for windows phone v5. Someone delight assist me

Hello

It seems that your problem is specifically related to Facebook.

I suggest you contact the Support of Facebook for back up on this.

Please do not hesitate to reply, in the case where y'all are facing in the future other issues with Windows.

Not able to meet the members of the hierarchy replacing Smartview for database planning

Hi all

I'm not able to see the other bureaucracy in smartview for the planning application which connect smartview is planning (installation is the hierarchy)

However, I was able to acquire the other bureaucracy via smartview with essbas connection

and I have also able to see through a web planning structure.

Help, please

Kind regards

VT

Yes, information technology is a known problem in Hyperion planning. If you lot are drilling on the grid itself, it will show yet.

Mark the thread as correct if that is what you lot are looking for.

FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

Hi all

We loaded FDMEE data to planning, information has been loaded successfully, simply not able to come across the data in the Planning Application.

In the processes log, I can see her mentioned data loaded in the Cube. Please suggest on this.

Thanks

Roshi

Two things:

-I wasn't talking about method yous import data but export data. Yous utilise the SQL method. Get to target Applications, select your application of planning/essbase, and set load method every bit a file. Memorize your settings

2014-06-19 12:26:l, 692 [AIF] INFO: rules properly locked the file AIF0028

2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube past launching the rules file...

2014-06-nineteen 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

2014-06-xix 12:26:fifty, 801 [AIF] INFO: the data has been loaded past the rules file.

2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

-Then export again and review. DAT file in the Outbox folder. Is information technology empty?

-You lot need to add a new dimension to your import format (Dimension add together > currency). And then add Local every bit expression

-Import, validate and export data

Not able to see the Assistants tab for Admin users to one of the Planning Application.

Hello

We employ the Hyperion Planning 11.1.2.2 and when I connexiona one of the planning awarding, I'1000 not able to meet the Administration nonetheless when I connexiona other applications I see the administration tab.

"" What I did is that I created a exam user in the native directory services shared and implemented the "interactive user" role of the application. When I logged in one application, I don't see the administration tab notwithstanding when I logged into another awarding, I can see the assistants tab.

can someone help me solve this problem.

Did whatsoever who face such a trouble before. Thank you in advance

Kind regards

VJ

We must reconfigure the deployment on application server and Web server later installing the patches, and once reconfigure us the Java heapsize would become past default that we must change them by going to regedit and this is how the higher up question will exist resolved.

FDMEE of planning data loaded successfully but not able to see the data

Hi all

We loaded FDMEE information to planning, data has been loaded successfully, simply not able to see the data in the Planning Application.

In import format, nosotros have non mentioned hsp_rates, information technology's that whole issue?

If nosotros accept different currencies, where nosotros must define?

Suppose we accept INR, USD and GBP if I want to load the data of INR, where we define?

Give thanks y'all

Praveen

Trouble solved

I've fabricated changes in the import format now I am able to run across the data in the Planning Awarding.

Thank you

I accept Photoshop Lightroom 5 and y'all accept downloaded Camera Raw viii.7.1 & DNG Converter with success. I accept a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'chiliad still not able to encounter the RAW images. The message says not available ove

I have Photoshop Lightroom 5 and y'all accept downloaded Camera Raw 8.7.1 & DNG Converter with success. I accept a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'1000 withal not able to encounter the RAW images. The preview not available for this DSC - ARW file message says. Whatelse should I do to come across my photos? Can anyone help?

Anita

Support for the camera has been added in the latest version of Lightroom, version v.7.1. After you download Camera Raw 8.7.ane volition accept no effect on Lightroom because Lightroom does not use plug in Camera Raw. You must ensure that you accept updated Lightroom to the latest version in lodge to have back up for this camera.

Not able to see the payload in newspaper B2B

Hullo all
I'm not able to see the payload in the b2b.log file. I want to see what data we are IP_OUT_Queue dequing and we send to our data providers.
Could U please tell which parameter must exist defined

We employ the AS2 protocol]

Concerning
CNU

How-do-you-do ALAIN,

Message is encrypted 3DES because encryption has been enabled in your remote TP DC. Thread message study displays the final bulletin that was sent to TP. You tin can check the original charge past clicking on the 'Payload' link on the detail of the study commercial Message, but it will non testify the particular of the header.

Kind regards
Anuj

Source: https://www.eehelp.com/question/not-able-to-see-the-64-bit-oracle-dataaccess-dll-of-gac/

Posted by: mccoygrecelf.blogspot.com

Share this post